For the first time ever, we are proud to introduce the Self-Tinting Solar Film that is tinted based on LIGHT and not as exposure to temperature. The film blocks 99% of the UV harmful light and 80% of the IR.
The advantages of the film are most valuable for energy savings and providing comfortable space. The heat isolation enabled by blocking the UV and IR will reduce the cooling costs. The film tinting will make the space much more comfortable as it will cut the glare and strong light.
Installation of the Self-Tinting Solar Film is quite easy, no need for electricity, it is activated by the amount of light. It is perfect for Automotive and Architecture applications.
This film comes at two versions:
Self-Adhesive to Stick on Existing Glass
The film blocks >99% UV and >80% IR as well as self-tinting / darkening upon sunlight. It becomes darker when sunlight strength getting stronger and get back to the starting point when sunlight is down. Glass with our Solar Tinted Film could lower the temperature by 12° degrees.
Architects, interior designers, property owners, this is for you!
Darken when exposed to sunlight
Block UV >99%
Block IR >90%
No electricity involved
Different VLT ranges
Colors: greyish or bluish
Do you have a photochromic darkening film glued inside triplex glass?
Currently photochromic darkening film only comes in an adhesive format on existing glass
How long does it take to install?
Installation is done within a week of receiving an order
What is the color of the darkening film?
There are 2 shades: gray and bluish
On which side of the window should the photochromic darkening film be affixed?
The photochromic darkening film is glued to the inside of the exterior window, i.e. from inside the room.
Is it possible to order a width smaller than 1.52?
No, the film comes in a roll when the width is fixed at 1.52 meters.
Is it possible to order less than 30 meters in length?
Different lengths can be ordered in multiples 5.
Is the photochromic film includes a removable protection layer?
The photochromic film includes a liner (removable protection layer) only on the adhesive side.
Will the Photochromic film become darker when applying on a UV resistance PVB triplex glass?
The Photochromic film beocmes darker once it is applied on UV resistance PVB triplex glass or if it is laminated with a UV resistance EVA layer.
It is the UVA spectrum range of 375-400 nm that cause the film to change color.
UVA (315-400 nm)
UVB (280-315 nm)
UVC (100-280 nm)